Media Converters
FT14H
FEATURES
- Two models, regular for wiring closets and Hardened for Industrial
- Family of temperature ratings and power supply types, external AC and internal DC
- All models provide an uplink switch on the RJ-45 port, Link Pass-Through
- Two sets of LEDs, on beveled facing and on the end, provide status information from any direction
- Metal enclosure. Panel mounting, DIN-Rail or, Rack-mount tray option
Robust packaging, extended temperatures models, a selection of AC and DC power types, ease-of-use features, and energy efficiency are the primary characteristics of the 10Mb FT14 regular and FT14H Hardened Media Converters. All models offer a graceful way to convert and transfer data between twisted pair and ST-type multi-mode and single-mode network cables for media flexibility in new or expanded 10Mb Ethernet networks. They comply with the Ethernet V1.0 / 2.0 specifications and the IEEE 802.3 standards. Power consumed in use is only 1.5 watts.
The FT14 units are for wiring closet and factory floor environments and use an external AC power supply for 0° to 50°C ambient temperature. All power supply units are UL and CE tested and approved for their specified rating. A heavy duty metal case with convection cooling is featured. The units can be mounted securely on a closet wall or the side of cabinet by using the metal panel mounting clips included. A rack-mount tray option is available, for up to 16 units.
The FT14H Hardened unit features a sealed metal case which is also used as a heat sink. No internal air flow is required for cooling, so the FT14H resists dust, dirt, moisture, insects and smoke, and prevents internal damage to the unit in case of fire. Choices of FT14H models for external AC or internal DC power are available. The DC power input may be nominally 9V, 24V, or -48V. Ambient temperature rating is up to –40°C to +75°C depending on the power source option used. The FT14H is suitable for temperature un-controlled “outdoor” applications. Mounting options include panel-mounting, DIN-rail, or rack-mount tray.
FT14 and FT14H 10Mb Media Converters are designed to provide reliable operation, even in stressed industrial-strength environments. Their high-strength fabricated metal packaging shields against Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI). Like all GarrettCom Ethernet connectivity products, they are backed by a three year warranty.
TB14H
FEATURES
- Two models, regular for wiring closets and hardened for Industrial
- Family of power supply types and temperature ratings, AC and DC
- Both models provide an internal BNC termination switch and an uplink switch on the RJ-45
- Two sets of LEDs, on beveled facing and on the end, provide status information from any direction
- Metal enclosure. Panel mounting, DIN-Rail or Rack-mount tray option
Robust packaging, a selection of extended temperature models, choice of AC and DC power types, ease-of-use features, and energy efficiency are the primary characteristics of the GarrettCom™ 10Mb TB14 and TB14H Media Converters. All models offer a graceful way to convert and transmit data between twisted pair and thin coaxial BNC network cables for media flexibility in new or expanded 10Mb Ethernet networks. They provide standard collision detection and indication, and comply with the Ethernet V1.0 / 2.0 specifications and the IEEE 802.3 standards. Power consumed in use is only 3 watts.
The TB14 regular-package units are for wiring closet environments and use an external AC power supply for either 0° to 40°C or the more stressful industrial 0° to 50°C ambient temperature. All power supply units are UL and CE tested and approved for their specified rating. A heavy duty metal case with convection cooling is featured. The units can be mounted securely on a closet wall or the side of cabinet, or by using the metal panel mounting clips included. A rack-mount tray option is available, for up to 16 units.
The TB14H Hardened unit features a sealed metal case which is also used as a heat sink. No air flow is required for cooling, so the TB14H resists dust, dirt, moisture, smoke and insects, and is rated for above-the-ceiling “plenum” applications. Choices of models for external AC or internal DC power are available. Ambient temperature rating is up to –40°C to +75°C depending on the power source used. The TB14H is suitable for temperature uncontrolled outdoor applications. Mounting options include panel-mounting, DIN-rail, or rackmount tray.
TB14 and TB14H Media Converters are designed to provide reliable operation, even in stressed industrial-strength and “outdoor” applications environments. Their high-strength fabricated metal packaging shields against Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI). Like all GarrettCom Ethernet connectivity products, they are backed by a three year warranty.
MC14 Tray
FEATURES
- Combines the flexibility of single-unit media converters with the convenience of rack mounting
- Low entry cost where only a handful of MC units are needed initially
- Rugged metal construction holds media converters in front for easy cable access and status LED viewing. Power supplies in the rear
- Mix and match 100 Mb MC units and 10 Mb MC units, regular and/or hardened
- Models with built-in common power supply
MC14-TRAY, rack-mounting for up to 16 - 14 series media converters. The rear space of the rack holds power strips/power supplies.
3340/50 - 3440/50
FEATURES
- Link Pulse Pass Through or Link Pulse Shut Down Modes are user selectable
- Conformal coated PC Boards Powered from Station Battery Bus to C37.90 or 12 Vdc
- Operates reliably at temperatures of -40°C to 85°C with no fans.
- Extended distances of 2 km over Multi-mode fibre and 12 km over Single-mode fibre. (Restrictions apply when connecting via hubs into networks)
- Multiple Mounting choices with built-in mounting brackets and optional mounting shelf
- Packaged in rugged, industrial quality Galva Neal and powder coated shells
- Each data channel has its own diagnostic LEDs for easier debug of installation
- 5- year warranty
GarrettCom models 3340, 3350, 3344 and 3354 are hardened fibre optic links that convert 10Base-T Ethernet from twisted pair copper to 10Base-FL or Single-mode fibre optics.
Models 3440, 3450, 3442, 3452, 3444 and 3454 are hardened fibre optic links that convert 100Base-T Ethernet from twisted pair copper to 100Base-FX, 100Base-SX or Single-mode fibre optics.
These links are stand-alone mounted and require no programming or set up. Simply mount the Link in an appropriate location and connect power. DYMEC Links are powered from various sources. The standard models accept 90 to 250 Volts ac or dc. Optionally, these Links can also be ordered for 12 or 24 to 48 Volts dc. The power supplies are surge withstand protected to both IEC 63000 and IEEE C37.90 standards.
14EH
FEATURES
- Two models, regular for wiring closets and Hardened for Industrial, AC and DC power
- Provides 100Mb Ethernet media conversion between twisted pair and fibre, FDX and HDX, with Link Pass-Through
- Supports IEEE 802.3u auto-negotiation on the RJ-45 port to enable an attached switch port to operate at 100Mb/s FDX for full fibre distance
- Available with fibre connectors for SC, ST, LC, or MTRJ types, multi-mode, single-mode, or 40km “long reach” single mode
- Metal enclosure. Panel mounting, DIN-Rail or Rack-mount tray option
All fibre media types, robust packaging, a selection of extended temperatures, choice of AC and DC power types, ease-of-use features, and energy efficiency are the primary features of the 100 Mb 14E and 14EH Media Converters.
The 14E regular-package units are for wiring closet environments and offer the choice of external AC power supplies for either 0° to 40°C or the more stressful industrial 0° to 50°C ambient temperature. A heavy duty metal case with convection cooling is featured. The 14EH Hardened units feature a sealed metal case which is also used as a heat sink. No internal air flow is required for cooling, so the 14EH resists dust, dirt, moisture, smoke and insects, and is rated for above-the-ceiling “plenum” applications. Choices of models for use with external AC or internal DC power are available. Ambient temperature rating is up to –40°C to +75°C depending on the power source used. The 14EH is suitable for temperature un-controlled “outdoor” applications. Mounting options include stand-alone panel-mounting, DIN-rail, or rack-mount tray.
All models supports both full and half-duplex mode via auto-negotiation so that an attached auto-negotiating RJ-45 switch or hub port operates at its highest performance level. A manual AN/reg switch allows the user to select auto-negotiation, and then the Media Converter transmits applicable auto-negotiation Fast Link Pulses (FLPs) to the attached device at LINK-enable. Operation on both the copper port and the fibre port is at 100 Mb F/H transparent in any case, providing support for full length 100 Mb fibre media distances on all fibre types. The Link Pass-Through feature is standard so that managed switches can “see through” the Media Converter for LINK indication that includes downstream cable segments. For the installer, a blinking LED on the fibre side shows fibre cable status.
The up-link switch on the TX port allows the unit to gracefully fit into any installation without crossover cables. All models come with two (2) sets of LED indicators, one set on the front for viewing convenience when the Media Converter is wall-mounted, and one LED set mounted in the end adjacent to the media ports for easy viewing when units are in a rack-mount tray. The 14E and 14EH Media Converters and other products are designed and manufactured in the USA and backed by a three-year warranty.
